PRODUCT REVIEW: PVC Fascia & Soffit – The Basic Terms Used | PVC Cladding

0
22

The PBSL Group use a simple model to explain where on the roof each PVC section can be found, and what it is used for.

There are two distinct types of PVC Fascia. One is a Standard Fascia Board, called sometimes ‘Jumbo’, which is normally between 16mm and 25mm thick. This means it is strong enough to go straight onto the ends of the roof’s rafters and strong enough to support your gutter in whatever weather.
Our selection can be viewed here:

The other type of Fascia Board is known as a ‘cover board’ and is typically 9mm thick. This means it isn’t strong enough to be attached solely to the rafters, therefore, it normally had a timber backing board. Have a look at our cover boards here:

The board found underneath between the Fascia and back to the wall is named a Soffit board. This can be plain or vented. We have a big range of Soffit boards here:

There is also the board that goes along the side which is called a Barge Board. This is normally exactly the same as the Fascia board.

For more information on any of our products or for more advice, please visit our websites:

Professional Building Supplies:
For all types of guttering, sealants and plumbing materials, visit our Professional Building Supplies website.

Gutter Supplies:
For all types of guttering, including PVC, Steel, Cast Iron and Aluminium, as well as a wide range of associated products, visit our Gutter Supplies Website.

Drainage Sales:
For all types of Underground and Above Ground Drainage Systems and associated products, visit our Drainage Sales Website.

PVC Cladding:
For all PVC Fascias, Soffits, Cladding Systems and PVC/Metal Guttering Systems, visit our PVC Cladding website.

You can also connect with us on one of our other Social Media Channels:
Facebook:
Twitter:
Google+:

Contact us:
Telephone: 0844 854 5990
Email: sales@guttersupplies.co.uk

source